ForgeStack Wall Rail 160 — 40 mm Pitch Mounting Rail, Support-Free
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
160 mm mounting rail on the ForgeStack 40 mm pitch, for the hanging bin and other rail storage. Support-free.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 6
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial
The mounting rail for the ForgeStack hanging bin — and for anything else that hangs on the 40 mm pitch. A 160 × 30 × 6 mm bar with four counterbored screw holes, exactly 40 mm apart, so the hanging bin's keyhole slots land on a screw pair wherever you slide it.
**Print details**
- Designed for support-free FDM printing. Slicer-validated (OrcaSlicer, 0.4 nozzle, 0.2 layer, PLA) — community printing in progress: be one of the first to print it and share your make!
- Rail: 160 × 30 mm, 6 mm thick, flat back — sits flush on wall, bench side, or cabinet
- Four through-holes (5.5 mm) at the system pitch of 40 mm, each with a 10 mm counterbore for the screw head
- Screw the rail up with any two holes; hang the bin on the other pair — or use all four and hang it anywhere along the rail
- The ForgeStack system: every module is built on a 40 mm grid. Baseplates carry square locating pins (11 × 11 mm, 4 mm tall) at the cell centres; every bin underside has matching square sockets (12 × 12 mm, 4.5 mm deep) — a drop-in fit with 0.5 mm clearance per side, no press-fit, no hardware.
- No bridges, no overhangs past 45° — every surface is vertical, horizontal, or sloped at 51° or steeper.
- Watertight/manifold mesh — slices clean in OrcaSlicer, Bambu Studio, PrusaSlicer, Cura
- Listing images are renders of the actual model geometry, not photos of a print — your Makes will be the first real photos
**Original design** — modelled from code, all rights reserved. The rest of the ForgeStack system is free on my profile too: baseplates in 3×2 and 4×4, bins in 1×2, 2×2 and a divided 2×3, a 1×1 pen cup module, a hanging bin and its wall rail — plus the Desk Cable Clip, the Modern Ribbed Planter Pot, the Stackable Storage Box and the Square Dice Tray. Every one of them support-free.
**License:** CC BY-NC 4.0 — free for personal use: print as many as you like for yourself and as gifts. No selling of prints, and no redistribution or sharing of the files.