1 / 3
First layer Z-offset Flashforge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
First layer Z-offset Flashforge. 0.12, 0.20 and 0.24.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 21
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Share Alike
First layer Z-offset Flashforge. 0.12, 0.16, 0.20, 0.24 and 0.28
For people new to 3D printing, or corexy! Beware that too much negative Z offset can scratch your build plate.
I ended up on +0.04 Z offset, on my Flashforge Adventurer 5M printing PETG with a 70C textured PEI bed.
It is also possible to tweak "bottom surface flow ratio" a bit
01/11-2026: Added more layer heights. Just do your calibration at whatever layer height you use the most. I did mine at 0.24.
Tags
firstlayercalibrationoffsetflashforgefirstlayerflashforgecreatorproflashforgeadventurerflashforgecreatorfirstlayertestoffsetcalibrationzoffsetflashforgedreamerflowratefirstlayerclearancezoffsetcallibrationfirstlayersflashforge5mflashforgeadventurer5mflashforgead5mflashforgeadventurer5mproflashforgeadventurer5xflashforgead5xflashforgecreator5pro