1 / 5
Demon Slayer Popcorn Bowl - Anime Relief Snack Bowl — image 1
1 / 5

Demon Slayer Popcorn Bowl - Anime Relief Snack Bowl

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A big popcorn bowl wrapped in a sculpted Demon Slayer-style character relief, made for anime night.

Rating
0 / 5
Likes
0
Downloads
6
Makes
0
Views
28
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial — Share Alike

Demon Slayer has a huge following, so I made a bowl to grab some popcorn while watching. It's my own original design, made with Meshy AI. Then I closed it up with a solid 5 mm floor so it holds snacks.

I printed mine in eSun ePLA Silk Gold at 350% scale on a Prusa Core One. That came out about 18 x 19.5 x 17.5 cm, and it took about 21 hours. The silk gold really makes the figures pop.

Two files are included:

- Demon_Slayer_Popcorn_Bowl_350pct.stl - full popcorn-bowl size (about 18 x 19.5 x 17.5 cm), ready to slice.

- Demon_Slayer_Popcorn_Bowl.stl - the same model at 100% (about 5 cm), if you want to pick your own size (for example, a pencil cup).

Supports: use paint-on organic supports ONLY under the overhanging relief figures. The inside of the bowl and the rim don't need any. Auto supports would fill places that are hard to clean.

Food safety: FDM prints are not food safe for direct contact. Use a paper liner or popcorn bag inside, or seal the bowl with a food-safe coating.

Fan art: this is a fan-made, non-commercial design. It is not affiliated with or endorsed by Koyoharu Gotouge, Shueisha, Aniplex or ufotable.

PRINT SETTINGS:

Printer: Prusa Core One (0.4 mm nozzle)

Filament: eSun ePLA Silk Gold (I used the generic eSun PLA profile)

Scale: 350% (or use the _350pct file at 100%)

Layer height: 0.20 mm

Infill: 15% (the walls make up most of the strength)

Supports: organic, painted on only under the relief figures (Generate support material ON, Auto generated supports OFF)

Brim: optional

Print time: about 21 h

Tags