A combination lock with a settable password
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A visual learning model on how a combination lock works
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 23
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
This has a total of 14 parts
This is a combination lock with 3 discs for 999 combination
Let's start on the build instruction
The 3 discs and the axle for it:
-Start by getting your "axleforlock" and your 3 discs, next put one disc on the empty space between the two small pillar (the one with a welded axle" . Then start by slotting the axle in, and adding the other 2 discs and finally push in the axle fully in until it pokes the other side
-After that, put on the dial
The main unlocking mechanism:
-First, start by putting in the "lockingmechanism", make sure its slide slot fits and matches
-Next, take your "mainmechanism" and your 20mm axle, "axleforunlocker". First put on the main mechanism, make sure the big filled space is on top and at the highest point, and the two legs point down to the locking mechanism. After that slide in the 20mm axle, then at the end point, slide in the axle for unlocker near the 3 discs.
-Make sure the two legs is in the container area of the locking mechanism
Setting up the password:
-Take the small pegs, insert it into the holes on the discs at your desire spot
Inspiration and information: