Grip6 Belt Buckle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3/16" thick Grip6 copy belt buckle, compatible with 1.5" wide belt straps.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 1
- Makes
- 0
- Views
- 22
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Print settings etc:
Printer: Bambu Lab A1
Filament: 3D Fuel PCTG
Filament Profile: 3D Fuel's PCTG Profile for A1
Infill: 100%
Nozzle: .4mm or Larger
Layer Height: As desired
___________________________________________________________________________
I've tested this 3/16" thick Grip6 copy belt buckle for over a year with no failure or breakage printed with 3D Fuel's PCTG. The buckle prints flat for max strength and best cosmetics. It is perfectly functional flat, but looks and feels a bit better with a light radius bent into it like the real product. For this I've included a 12* caul to heat bend it against. See instructions below.
Designed for use with Grip6's various 1.5" wide cloth belt straps with integrated plastic catch end. https://grip6.com/products/midweight-belt-strap-1-5 Of course you can print your own belt strap from TPU, but I have tried this and it is not as comfortable as the real textile straps.
___________________________________________________________________________
Instructions:
1) Print the buckle and caul with PCTG (you can try other filaments, but I've only durability tested the PCTG)
2) Submerge the buckle in near boiling water for 10 - 20 seconds
3) Once the plastic is pliable, bend the buckle over the caul, holding it tightly and evenly in place
4) Then hold both the buckle and caul under cold running faucet water for 20 - 30 seconds, until buckle holds its new shape
_______________________________________________________________________________
If you would like my models in different file types to facilitate easier modification or reverse engineering, send me a message and I'd be glad to provide them.