Mini BIC Lighter Holder for Pencil Cups (Mesh & Rectangular, Parametric)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hang a Mini BIC lighter on the outside of your desk pencil cup.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 8
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- GNU General Public License v3.0
A small clip-on holder that keeps a Mini BIC (J25) lighter on the outside of a pencil cup, where it's easy to grab but doesn't get lost among the pens. It hooks over the rim of the cup; only a thin lip goes inside, so the cup's space stays free.
- Two versions included: Rectangular / flat-walled cups (STL provided for 3.5 mm wall), Round wire mesh cups (the classic office kind, STL for a 3.1 mm rim, Ø84 mm).
- Lighter top flush with the rim by default. It looks tidy and is still easy to pull out. The pocket is only 20 mm deep, so most of the lighter is free to grab. (parameters adjustable in the .scad)
- Printed and tested on both cup types. The lighter fits with a little play, so it drops in and comes out easily. For a snugger fit, lower clearance (e.g. 0.5) in the .scad.
Print without support at the STL orientation, a brim might help depending on material/bed adhesion.