Cartridge model pack with spring loaded primers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cartridge model pack with spring loaded primers
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 17
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Models of several cartridges. Modeled after the maximum dimensions allowed by C.I.P. standard. The shotgun ammo lenght is the lenght of the casing opened (lenght after being fired). If I'll make more models in the future, they will be uploaded and noted in the changelog. I'll make new models only if I have the need for them, so don't exactly expect new models being uploaded on some schedule.
The cartridges have a springloaded primer, so that they can be used for dry fire training. As a pin that holds the primer in place a piece of filament is used, so you can finally use the leftover pieces of filament rolls instead of throwing them away. The hole for the filament pin will probably by tight depending on your print settings. There are two primer sizes, the small one is used by 7,65 browning and the big one is used by everything else. Both primers have a thicker and thinner side, it should be assembled so that the thicker side is hit by the primer. For a spring use anything that fits, something not too terribly stiff.
If your printed primer does not fit in the cartridge, check if your printer is correctly calibrated, if you have a correctly calibrated printer and the primer still does not fit, you have encountered some anomaly, fortunately you have the .step file available to fix it yourself.
Changelog: