Mennekes 17021 Anbausteckdose Deckel-Halteband
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ersatzteil für das originale Halteband der Mennekes 17021 Steckvorrichtung
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 40
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Deutsch
Mennekes 17021 – Ersatz-Halteband
Da das originale Halteband der Mennekes 17021 Steckvorrichtung nicht einzeln als Ersatzteil erhältlich ist und ein verlorener Deckel zu verschmutzten Kontakten führt, habe ich dieses passende Ersatzteil inklusive des notwendigen Hinweises zum Sicherungsstift selbst designed.
Eigenschaften: Passgenau für den Mennekes 17021, schützt vor dem Verlust des Deckels und hält die Kontakte zuverlässig sauber.
Druckempfehlung: Gedruckt in TPU (Flex-Filament) für die ideale Mischung aus Flexibilität und Langlebigkeit.
Montage & Hinweise
Sicherungsstift entfernen: Der originale Sicherungsstift (der den Deckel am Gehäuse hält) muss entfernt werden – am besten lässt sich dieser dafür vorsichtig durchtrennen oder herausdrücken (siehe Bild 2 und Bild 3 für Details).
Alte Bandreste entfernen: Reste des alten, gerissenen Haltebands aus dem Deckel entfernen (z. B. indem man sie mit einem starren Draht herausschiebt).
Neues Halteband einsetzen & fixieren: Das gedruckte TPU-Ersatzteil in den Deckel einschieben, den Deckel am Gehäuse positionieren und einen neuen Sicherungsstift einsetzen, um den Deckel wieder zu montieren.
Wichtiger Sicherheitshinweis / Disclaimer: Arbeiten an elektrischen Anlagen und Betriebsmitteln dürfen gemäß DGUV Vorschrift 3 (und DIN VDE 0105-100) grundsätzlich nur von qualifiziertem Elektrofachpersonal (bzw. unter Leitung und Aufsicht einer Elektrofachkraft) durchgeführt werden. Der Anwender handelt eigenverantwortlich.
Viel Spaß beim Nachdrucken! Über ein Feedback oder ein geteiltes Foto eurer Prints freue ich mich.
----------------------------------------------
Englisch
Mennekes 17021 – Replacement Lid Strap
Since the original retaining strap for the Mennekes 17021 plug/socket isn't available as a standalone spare part—and a lost lid leads to dirty contacts—I designed this replacement strap myself.
Features: Custom-fit for the Mennekes 10721, prevents losing the protective cap, and keeps your contacts clean.
Print Settings: Recommended to print in TPU for the ideal balance of flexibility and durability.
Assembly & Instructions
Remove the hinge pin: The original securing pin (hinge pin holding the lid to the housing) must be removed—best done by cutting/snipping it through carefully (see picture 2 and picture 3 for details).
Remove old strap remnants: Push out any remnants of the old, broken strap from the lid using a stiff wire.
Install the new strap & pin: Slide the printed TPU replacement part into the lid, align the lid with the housing, and insert a new hinge pin to secure everything in place.
Important Safety Disclaimer: According to safety regulations, work on electrical systems and equipment must be carried out exclusively by qualified electricians or under their direction and supervision. Users assume all responsibility and liability for installation and use.
Happy printing! Feel free to leave feedback or post a photo of your makes.