1 / 3
Hand Coffee Grinder Dock - Stand with Swappable 48 / 50 mm Inserts, Brush & Handle Slots — image 1
1 / 3

Hand Coffee Grinder Dock - Stand with Swappable 48 / 50 mm Inserts, Brush & Handle Slots

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Countertop dock for hand coffee grinders: swappable 48/50 mm collar inserts, brush slot, crank rest, dosing cup ring.

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
5
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial

A countertop dock that keeps your hand coffee grinder standing upright, plus a home for its brush, dosing cup and crank handle. The grinder's bottom catch cup drops into a swappable collar insert in the round cradle well; the insert is keyed so it never spins and has a finger scoop to lift it out.

Two inserts are included, for grinders with a 48 mm or a 50 mm bottom diameter. These are nominal sizes: measure the bottom of your grinder with calipers and pick the matching insert (0.4 mm clearance is built in). Also on the dock: a vertical brush slot, a drop-in crank-handle rest slot (knob up) and a 46 mm ring recess for a dosing cup or funnel. Rounded edges, chamfered bottom. A nice add-on gift for anyone getting a hand grinder this winter.

Print settings: 0.2 mm layers, 15-20% gyroid infill (more infill = heavier, steadier dock), 3 walls, NO supports, PLA or PETG. The body prints flat on its base; the insert prints standing, open end up. Size 150 x 100 x 46 mm, about 114 g, about 10 h. Two colours as separate parts, no multi-material needed: walnut brown or black body + oat / cream collar insert and accent.

Files: body (base), accent, insert 48 mm, insert 50 mm. The images are 3D renders. Designed with AI-assisted parametric CAD. Not affiliated with any grinder maker.

Updated 15 Nov 2026: the collar inserts now have a proper 0.6 mm bottom chamfer (the earlier files left a thin skirt on the first layers). The base is unchanged. Not yet test-printed.

Tags