1 / 6
Working Rotating Boat Lift - Hand Crank, Gondolas Stay Level (1:200) — image 1
1 / 6

Working Rotating Boat Lift - Hand Crank, Gondolas Stay Level (1:200)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Hand-cranked 1:200 rotating boat lift: a gear train keeps both gondolas level as the wheel turns. 1:200 + N set on Cults

Rating
0 / 5
Likes
1
Downloads
1
Makes
0
Views
9
Reviews
0

Updated at source:

Model information

Category
Vehicles
License
Creative Commons — Attribution — Noncommercial

A hand-cranked WORKING model of a rotating boat lift (in the spirit of the famous rotating boat lift wheels) at 1:200: the wheel is about 147 mm tall and lifts a boat 120 mm between a lower canal stub and an aqueduct. An epicyclic gear train (sun 30 / idler 20 / planet 30 teeth, module 1.2) has the same tooth count on sun and planet, so the planet never rotates in space and both gondolas stay level while the wheel turns. Half a crank turn swaps the upper and lower gondola. This is the free single-scale 1:200 set: 14 STL files plus loose boats, no supports (PrusaSlicer-checked, 0.4 mm nozzle, 0.2 mm layers), about 267 g. Honest notes: the gondolas are open at the back and carried only by the front arm plate, the towers and the 6 mm axle are thicker than scale, and the boats are loose. Designed and slice-checked, NOT test-printed yet - renders, not photos. The full kit with 1:200 + N 1:160 and multicolour 3MF files is on Cults3D: https://cults3d.com/en/3d-model/game/working-rotating-boat-lift-model-hand-crank-gondolas-stay-level-1-200-n-1 . Part of a series of working hand-cranked port and railway models. Made with AI assistance (parametric design in Blender).

Tags