1 / 4
Flexi Rooster Keychain 鸡 | Chinese Zodiac | Print in Place — image 1
1 / 4

Flexi Rooster Keychain 鸡 | Chinese Zodiac | Print in Place

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A wiggly print-in-place rooster keychain: three tail feathers fan out, each on its own joint.

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
1
Reviews
0

Updated at source:

Model information

License
Standard Digital File License

Here's the Rooster (鸡), the sixth of our twelve Chinese zodiac flexi keychains, and the proudest one so far.

It prints in one go: no supports, no assembly, no glue. Six parts, five joints, a head with a comb, beak and wattle, a fan of three tail feathers that each swing on their own joint, the character 鸡 on its chest, and the key-ring loop built into the comb.

Size: 89 x 39 x 6 mm.

Test-printed on our Creality SPARKX i7: that's the print in every photo and video. A ready-made Creality Print project for the i7 is included next to the STL, plus an Anycubic Kobra X project set up the same way (not test-printed on the Kobra X yet).

Print settings:

  • PLA or PETG, 0.4 mm nozzle, 0.2 mm layers

  • No supports, no brim

  • Keep elephant-foot compensation on (about 0.1-0.15 mm) so the joints don't fuse to each other

  • After printing, flex each joint gently once to free it

Which material: PLA is fine for a keychain that mostly stays indoors. If it lives in your pocket or rides in a hot car, use PETG (PLA starts to soften around 55-60 °C).

Six more animals are on their way. Follow Two Paws Workshop so you don't miss them.

Designed by us with AI help (the shapes are written as OpenSCAD code), then printed and tested for real: every photo and video here is the actual print.

Two Paws Workshop: two of us at the bench, making things that move.

Watch all twelve wiggle together on our YouTube Short: https://youtube.com/shorts/ZrqWbXjezEU

Tags