1 / 2
DIY Klipper Expander Board - RP2040/2350 + MOSFET — image 1
1 / 2

DIY Klipper Expander Board - RP2040/2350 + MOSFET

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

DIY Klipper Expander Board - RP2040 or RP2350 + MOSFET for adding 5 Hotends to MedusaHC.

Rating
0 / 5
Likes
1
Downloads
1
Makes
0
Views
14
Reviews
0

Updated at source:

Model information

License
GNU General Public License v3.0

DIY Klipper Expander Board - RP2040 or RP2350 + MOSFET for adding 5 Hotends to MedusaHC.

Each hotend needs the following:
1. Hotend heater (needs external mosfet)
2. Hotend Fan (needs external mosfet)
3. Thermistor
4. Docking Switch

Each hotend heater and fan needs a mosfet to power it, however the switch can be connected to any of the available 15 pins on the RP board. 
The thermistor needs to be on one of the ADC ports and there are 4 on a RP2040/2350, hence a second RP board is needed for the 5th ADC port. If you are adding 4 or less hotends then 1 RP zero board is enough.

The base can hold upto 10 mosfet modules (5 for each hotend and 5 for each fan) and up to 2 RP2040/2350 zero boards. The brace is to keep the RP boards from moving, you will need to print 2 braces.

The top can mount a 4010 fan for ventilation as the mosfet's will get hot.