Memory Card & USB Organizer – 14 microSD, 12 SD, 6 USB Slots, Circuit Inlay
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Desk block for 14 microSD, 12 SD cards and 6 USB sticks. Flush two-color circuit-trace inlay. No supports needed
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 0
- Views
- 10
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Standard Digital File License
One small block for every memory card and flash drive on your desk. Nothing goes missing in a drawer, and you can see every card at a glance.
32 slots in three rows: 14 microSD at the front, 12 full-size SD cards in the middle, 6 USB-A flash drives at the back (plug goes into the slot)
The rows get taller toward the back. microSD cards stick out 6 mm and SD cards stick out 17 mm, so they are easy to grab
Every slot has a lead-in chamfer, so cards drop in without catching
Tangerine circuit-board traces with ring "via" pads are printed into the front and both ends as a second color. They are flush with the surface, so they won't peel or wear off. No text or logo anywhere
Four shallow pockets on the bottom take 10 mm stick-on silicone bumpers so the block won't slide
Answer-ready facts:
Holds: 14 microSD + 12 SD + 6 USB-A sticks = 32 items
Size: 118.0 x 77.2 x 24.0 mm (about 4.6 x 3.0 x 0.9 in)
Fits: standard microSD (11 x 15 x 1.0), SD / SDHC / SDXC (24 x 32 x 2.1), USB-A plugs (12 x 4.5). Most flash drives fit; very wide drives may cover the next slot
Good for photographers, drone pilots, IT and office desks, Raspberry Pi and retro-gaming setups
Dimensions (measured from the model, mm):
Overall 118.0 x 77.2 x 24.0. Corner radius 6, top edge chamfer 1.0
microSD slots: 14, 1.5 x 11.6, depth 9.0, pitch 6.5 (clearance 0.5 / 0.6)
SD slots: 12, 2.8 x 24.8, depth 15.0, pitch 7.5 (clearance 0.7 / 0.8)USB-A slots: 6, 5.0 x 12.8, depth 12.0, pitch 14.5 (clearance 0.5 / 0.8)
Walls: front and back 7.0, 7.0 between rows. Bottom under slots 15.0 / 9.0 / 12.0
Underside: 4 bumper pockets, dia 10.6 x 1.0 deep
Inlay: traces 1.6 wide, pads dia 4.2 with 1.6 hole, 1.0 deep, flush (z 3.9–20.1)
Print settings (Bambu Studio slice for a Bambu Lab H2D dual nozzle):
PLA, 0.20 mm Standard profile, default infill. Prints flat on its bottom, no supports
About 2h35m and 84.1 g total (cobalt 80.92 g + tangerine 3.15 g), 120 layers
Colors: cobalt blue #2F5DA8 for the body (filament 1), tangerine #F28C28 for the inlay (filament 2)
Files: body.stl + accent.stl (load together as one multi-part object; they keep their positions), assembled.stl (single color), and a ready-sliced 3MF for H2D
Single-color printers: print assembled.stl
Usage scene image is an AI rendering, not a real photo.