BROS CNC Dust Shoe – LowRider V4 / AMB 1400 FME-P DI
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Custom 2-part CNC dust shoe designed for the LowRider V4 with an AMB 1400 FME-P DI spindle.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 12
- Makes
- 0
- Views
- 55
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
BROS CNC Dust Shoe – LowRider V4 / AMB 1400 FME-P DI
A custom-designed, two-part CNC dust shoe developed by BROS for the V1 Engineering LowRider V4 CNC equipped with an AMB 1400 FME-P DI spindle. The design was developed for my CNC installation inside a Renault Trafic, where available space is limited. It provides dust extraction directly around the cutting tool while maintaining a compact design.
DESIGN & COMPATIBILITY
Designed for:
V1 Engineering LowRider V4 CNC
AMB 1400 FME-P DI spindle
Compatible AMB spindle mounting clamps
The dust shoe consists of two separate 3D-printed parts:
Dust Shoe A: Rigid main body, printed in Fiberon PET-CF17.
Dust Shoe B: Flexible lower dust skirt with integrated bristles, printed in TPU 95A.
Compatibility with other spindle models or CNC configurations has not been tested.
3D PRINTING & ASSEMBLY
The main body is printed in Fiberon PET-CF17 (carbon-fiber-reinforced PET). The flexible lower skirt is printed in TPU 95A. The TPU skirt uses an unconventional design and printing orientation. It is printed lying flat, even though this is not necessarily the most convenient orientation for printing. This design allows the flexible skirt to be stretched over the rigid body and secured using an integrated tongue-and-groove connection. The tongue is part of the TPU skirt, while the corresponding groove is integrated into the PET-CF17 body. Once stretched into position, the TPU skirt remains tensioned and secured in the groove. No glue, screws or additional fasteners are required to attach the TPU skirt. Other brush or skirt designs can also be used if preferred.
MOUNTING
The dust shoe is mounted directly to the LowRider V4 core and the lower AMB spindle clamp. The upper mounting tab is secured to the CNC core using two screws, while the lower mounting point connects to the spindle clamp. Depending on printing tolerances and material shrinkage, minor adjustments may be necessary. On my installation, I slightly sanded one edge near the lower AMB spindle clamp to ensure sufficient clearance and prevent unwanted contact. Check all clearances throughout the CNC’s full range of movement before operating the machine.
INCLUDED FILES
DUST_SHOE_A.stl – Rigid main body
DUST_SHOE_B.stl – Flexible TPU dust skirt
ORIGINAL DESIGN & CREDITS
Original design: BROS – Modular Interior Systems. This dust shoe is an original BROS design, developed independently in Fusion 360. It was designed to fit the V1 Engineering LowRider V4 CNC equipped with an AMB 1400 FME-P DI spindle and compatible AMB mounting clamps. No geometry from the original LowRider V4 or third-party AMB mounting clamps was used in the design. Only the necessary mounting dimensions and hole positions were referenced to ensure compatibility.
LowRider V4 is a CNC design by V1 Engineering.