Airbus A320 Main Instrument Panel [MIP] Speakers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remix of SimGuy's outer MIP panels made to mount two outer speakers.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 27
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
This is a remix of SimGuy's awesome MIP availible for both the V1 and V2 MIP panels. There are both .step files, and stl files for direct editing and printing.
The build uses the following hardware for both versions:
2x Roadstar (or different branding), VO-502 5 inch speakers: https://www.aliexpress.com/item/1005008678600030.html
8x M5x14mm screws: https://www.aliexpress.com/item/4000981220901.html
8x M5x6mm (7mm OD) Heat Inserts: https://www.aliexpress.com/item/1005008318533389.html
An amplifier of choice, i used a YS-AP50L amplifier since it has USB support: https://www.aliexpress.com/item/1005006481061534.html
And approximately 3m of speaker cable to connect the speakers to the amplifier.
Assembly:
You will need to print two of the spacer parts.
Use a soldering iron to insert the heat inserts into the four holes and with glue the other pieces of the speaker panels from SimGuy's patreon to this MIP. Then glue in the vents and the speaker mesh since it can get tricky to do this later. Screw in the speaker from the back, through the speaker spacer and into the front panel. Solder on the cables and wire them to your amplifier and connect to your PC. I glued on the amplifier on the back of the MIP frame using some hot glue.
I used an application called Voicemeeter which I can use to route different applications to the speakers.
I have also included some simple dummy vents I made for the V1 panel since it didn't have any before.