Amethyst Fantasy Sword | 150 mm, No Supports
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 150 mm fantasy sword split into two flat halves, so it prints with no supports. Glue together with filament pins.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 0
- Makes
- 0
- Views
- 5
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial
A 150 mm fantasy sword with a gem in the crossguard and a crown-shaped pommel. It is split down the middle into two flat halves, so each half prints with no supports. Glue them together afterwards.
Assembly:
Each half has three 2.1 mm dowel holes
Cut three 5.5 mm pieces of 1.75 mm filament as alignment pins
Glue the halves together
Print notes:
Tested on Bambu Lab P2S, 0.4 mm nozzle, PLA
0.08 mm layers for the fine details, 3 walls, 10% gyroid infill
Ironing on top surfaces, no supports
Both halves are on one plate. About 150 mm long
Mine is plain white. Paint it purple and gold for the amethyst look.
Files: a ready-to-print 3MF for Bambu Studio and both halves as STL.
How it was made: the base shape was generated with AI, then cleaned up, split and prepared by hand for printing. All photos are real prints from my P2S.
Commercial use: this model is for personal use only (CC BY-NC). If you'd like to sell prints, please send me a message to discuss a commercial license.
☕ Enjoying this model? You can support my work with a coffee: https://buymeacoffee.com/mumakes