Spiral Christmas Tree - Vase Mode Tabletop Tree, Swirl Cone 15 cm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tiered cone tree with six swirling flutes and a 300 degree twist, one continuous surface for spiral vase mode, 15 cm tal
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 9
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A tabletop tree that prints in about an hour: five tiers, six flutes swirling 300 degrees up the cone, and a pointed tip. One continuous outer surface, so it prints in spiral vase mode (one wall, no seams) or as a normal solid.
Details
154 mm tall. Scale it to any size: 10 cm for the shelf, 25 cm for the table.
- Every slope stays under 45 degrees in both directions (tiers lean out 9 degrees and step back in at 43 degrees), so the single wall never prints in the air.
- In vase mode use a 0.6 to 0.8 mm line width and 3 to 4 bottom layers.
- Print a forest in green, white and gold.
Print settings
Layer height 0.2 mm, vase mode (spiralize outer contour) or 2 walls + 10 % infill, no supports.
- About 12 g of PLA in vase mode, 124 g solid.
Files: spiral-christmas-tree-vase-mode.3mf in Model Files; the STL (12 MB) is zipped in Other Files as spiral-christmas-tree-vase-mode-stl.zip.
Notes
Images are renders of the actual file.
- Designed with AI-assisted procedural modeling and checked automatically for printability: watertight mesh, overhang analysis and wall thickness.
- Free under CC BY-NC-SA: print and remix it for personal use, credit the designer, no commercial use.
More from the shop
Full collection (STL, 3MF, OBJ): https://cults3d.com/en/users/aliyalinkilic/3d-models
- Paid favourite from the same series, Snowflake Tea-Light Holder: https://cults3d.com/en/3d-model/home/snowflake-tea-light-holder-christmas-lantern-led-candle-holder
New designs drop every day.