1 / 4
Flexi Rabbit Keychain 兔 | Chinese Zodiac | Print in Place — image 1
1 / 4

Flexi Rabbit Keychain 兔 | Chinese Zodiac | Print in Place

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A wiggly print-in-place rabbit keychain: long ears up top, big feet and a puffball tail.

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
3
Reviews
0

Updated at source:

Model information

License
Standard Digital File License

Here's the Rabbit (兔), fourth in the Chinese zodiac and the cutest of our twelve zodiac flexi keychains.

It prints in one go: no supports, no assembly, no glue. Four parts, three joints, a round face with two long upright ears and the key-ring loop between them, a round body, big back feet and a puffball tail, with the character 兔 on its chest.

Size: 95 x 37 x 6 mm.

Test-printed on our Creality SPARKX i7: that's the print in every photo and video. A ready-made Creality Print project for the i7 is included next to the STL, plus an Anycubic Kobra X project set up the same way (not test-printed on the Kobra X yet).

Print settings:

  • PLA or PETG, 0.4 mm nozzle, 0.2 mm layers

  • No supports, no brim

  • Keep elephant-foot compensation on (about 0.1-0.15 mm) so the joints don't fuse to each other

  • After printing, flex each joint gently once to free it

Which material: PLA is fine for a keychain that mostly stays indoors. If it lives in your pocket or rides in a hot car, use PETG (PLA starts to soften around 55-60 °C).

That completes all twelve animals of the Chinese zodiac. Follow Two Paws Workshop so you don't miss them.

Designed by us with AI help (the shapes are written as OpenSCAD code), then printed and tested for real: every photo and video here is the actual print.

Two Paws Workshop: two of us at the bench, making things that move.

Watch all twelve wiggle together on our YouTube Short: https://youtube.com/shorts/ZrqWbXjezEU

Tags