1 / 4
Rack for YOOPAI Pro Filament Storage (Dry) Box — image 1
1 / 4

Rack for YOOPAI Pro Filament Storage (Dry) Box

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A modular rack system to store the YOOPAI Filament Dry box. Extend in width and height as required.

Rating
0 / 5
Likes
1
Downloads
9
Makes
0
Views
57
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution

I started using the YOOPAI dry boxes to store my non-PLA filaments. The boxes come with a humidity monitor and a label template (U-Print). I developed this modular rack to avoid digging out the bottom box from the stack, which usually is the one you need :)

To space the shelves and reduce print time I use 1/2 inch PVC pipe from the blue or orange home improvement folks.

The shelf is designed and broken up to be printed on a 256mm x 256mm build plate.

This project also includes the material tags that plug into the dry box and a storage bin the "Blood Slide Box".

Use the optional Cabinet Door Bumpers 1/2in to stop the rack from sliding around.

The package includes a fixture to glue leftover pipe to a useful length. The fixture can also be used to make vertical pipe assembly collinear. This can help in case your pipe cuts are not perfectly perpendicular. Connector plugs are provided. 

Don't glue the spherical end caps unless you are certain that you won't extend the rack in the vertical. Those buggers are difficult to remove once glued in place. Ask me how I know. To remove, drill out the cap and dowel with a 13mm drill. At that point it should be pretty easy to break the cap off.  Use the 13mm to 15.5mm adapter to add another shelf.

V2:

  • Changed the dowels that connect left-over pipe material. No scrap left behind.

  • Shrank the spherical dowel cap, so two racks can be seamlessly attached to each other.

Tags