Gothic Wall Hook Rack – Cathedral Gargoyles
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An ornate gothic rack with five curved hooks, cathedral tracery and two gargoyle figures.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 2
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
About the model
A cathedral-inspired decorative wall rack with pointed arches, delicate spires, open tracery and two gargoyle guardians above five curved hooks. Intended as an ornamental display or a light-duty holder after checking the geometry and mounting method.
Files and dimensions
Includes STL and 3MF geometry, approximately 100 x 21.73 x 96.27 mm (X x Y x Z). The STL is scaled to match the millimeter size of the 3MF. Scale uniformly as needed. The 3MF is not a tested printer profile.
Print preparation and mounting
The hooks, spires and tracery are delicate. Inspect thin features, overhangs, layer orientation and support placement in the slicer. Suggested starting point: PLA or PLA+, 0.4 mm nozzle and 0.12-0.20 mm layers. Physical print results and settings have not been verified.
Load capacity and wall mounting have not been physically tested. Treat the model as decorative or light-duty only; no load rating is claimed. Choose a suitable mounting method after inspecting the geometry. No fixings or verified mounting system are included.
Image and licence
The cover is a digital preview rendered from the actual STL, not a photograph of a printed object.
Credit: Flavora Studio. CC BY-NC-ND 4.0, as selected below. Commercial use requires separate permission.