Einstar Rockit TPU case with hand strap hole and mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model is a TPU case for Einstar Rockit 3d scanner. It comes with lanyard hole and a separated tripod mount
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 24
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a TPU case for Einstar Rockit 3d scanner.
Due to the shape of Einstar Rockit, cases with hard plastic generally need to be printed in 2 parts and use screw to connect the front and back part. This case is able to keep to a single piece design due to the use of TPU, which allows a bit of stretching and bending the flaps.
The tripod stand hooks up to the case using the wide slit on the case, and also have a loop on the back, ready to interface with a phone adapter.
The phone adapter I included is a simple snap in adapter, meant for samsung galaxy 24 ultra with case. You will likely need to adjust the dimension or design your own to fit your phone in.
======= Hardware required =======
For the tripod mount, you need a 1/4-20 threaded insert. This model is made for this insert ( originally meant for woodworking )
To connect the phone adapter to the tripod mount, you need a socket head m3 bolt, thread length between 10~15mm, and also a m3 nut.
======= How to print =======
Print the case with TPU ( I use 95A ) with the back side of scanner on the bed. Be sure to dry the TPU before print! And look up how to print TPU with your printer. It can be tricky to print these soft filaments.
Print the tripod mount with PETG, with it's side on the bed so you have the whole hook structure in same layer to provide the strength.
