1 / 3
Articulated Caterpillar Bobbin Holder - Print-in-Place — image 1
1 / 3

Articulated Caterpillar Bobbin Holder - Print-in-Place

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Print-in-place caterpillar that holds Class 15 bobbins and clicks into shape every 15°. 8/12/16 sizes, no supports.

Rating
0 / 5
Likes
2
Downloads
1
Makes
0
Views
8
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial

Meet the bobbin caterpillar! A cute print-in-place caterpillar that keeps your sewing machine bobbins tidy, visible and always at hand.

Each body link holds one standard Class 15 / 15J bobbin (20.3 x 11.7 mm). The links are joined by printed pin joints with a small spring detent, so the caterpillar CLICKS into place every 15 degrees: lay it straight, curve it, wiggle it like an S or curl it into a ring around your sewing machine, and it stays in that shape.

Features

- Print-in-place: comes off the bed already assembled, no supports, no glue, no hardware.

- Click joints at 0, ±15 and ±30 degrees that hold the pose.

- 3 sizes: 8, 12 or 16 bobbins (STLs exported already curled to fit a 220 x 220 bed).

- Hinge test coupon (19 min) to check your printer's tolerances first.

- Parametric OpenSCAD file included (number of links, pose, clearance).

Print settings (tested on my Ender 3 V3 KE)

- PLA, 0.2 mm layers, 3 walls, 15% infill, supports OFF, no brim.

- Adaptive layer height OFF, elephant-foot compensation 0.2 mm.

- Optional colour change: add a pause at 13.8 mm to give the head top and antennae a second colour.

- After printing, bend each joint firmly once in both directions to free it. Then you will feel the clicks.

- Print time: 8 links 2 h 19 min (45 g), 12 links 3 h 13 min (62 g), 16 links 4 h 08 min (80 g).

- Eyes and cheeks can be painted with a marker.

All photos are real prints on my Ender 3 V3 KE.

If you like it, a like helps a lot!

Original design by dj_bel. Not AI-generated.

Tags