Targer patch sticker dispenser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My remix of Amigamer's target patch dispenser.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 13
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Share Alike
My version of sticker dispenser. I printed mine with PETG material with no supports, I recommend at least 3 perimeters with 20-100% infill, the more infill, the sturdier construction.
Three different desings of optional belt loops are included for attaching the dispenser to a belt (ideally 50mm belt). These brackets require M3x10mm countersung head screws for assembly. Each version has a different design for holding or releasing the dispenser from the belt. All versions of the belt loops are compatible with all versions of the dispenser.
A sturdy enlarged ring is included, allowing the dispenser to be hung from a carabiner or a cord as an alternative to belt mounting, ideal for attaching it to a range bag, tactical vest, backpack etc.
The 52mm design is made to be the most versatile, mostly made for 2 pieces of 25mm wide rolls of patches with the use of 2mm spacer in between,
or one 50mm wide roll of patches with the use of 2mm spacer on the outer side,
or 2 pieces of 19mm wide rolls of patches with the use of 2mm and 12mm spacers, 2mm in the middle and 12mm on the outside.
The 40mm design is mainly made for 2 pieces of 19mm wide rolls of patches with the use of 2mm spacer in the middle.
The 50mm design is made for up to a 50mm roll of patches.