1 / 4
Staročeská vánoční zvonička – 16dílný model | The Village Bell – Flavora Studio — image 1
1 / 4

Staročeská vánoční zvonička – 16dílný model | The Village Bell – Flavora Studio

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Miniature bell tower with star and bell | Zvonice s hvězdou a zvonem

Rating
0 / 5
Likes
3
Downloads
16
Makes
0
Views
28
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

# Old Bohemian Christmas Bell Tower | 16-Part Modular Winter Miniature

Flavora Studio — České Vánoce / Czech Christmas Collection

## The story

As evening settles over a small Bohemian village, a bell rings beneath a snowy timber roof. Its carved flowers and stars recall old Czech Christmas traditions, when handmade decorations turned even a quiet winter night into something special.

This ornamental village bell tower is designed as a miniature display piece for a Christmas village, winter diorama, shelf, or festive centrepiece. The original concept is inspired by traditional Czech folk decoration, rather than copied from a specific historic building.

## A modular model with 16 printable parts

Instead of one monolithic print, the model has separate parts for the carved wood, stone base, hanging bell, decorative stars, posts, and both snow-covered roof panels. This lets you print the different materials and colours without multicolour filament changes in a single print.

- 16 individually selectable objects in both 3MF variants.

- One 3MF shows the assembled model to preserve alignment and uniform scaling.

- The second 3MF lays out all parts on a plate at the original 100% scale (approximately 193 × 141 mm total XY footprint; not sliced for a specific printer).

- The optional STL archive contains all 16 parts as separate files.

- Four locating pegs are integrated into the posts and matching sockets are included in the wooden base.

Assembled size at 100%: approximately 54 × 59 × 100 mm. For FDM using a 0.4 mm nozzle, we suggest trying 180–200% scale for better ornament detail. Scale every component by the same factor; re-arrange them on multiple plates if necessary.

## Suggested FDM settings

- Nozzle: 0.4 mm

- Layer height: 0.12–0.16 mm

- Walls/perimeters: 3

- Infill: 12–18%

- Supports: inspect local overhangs, especially the timber roof, bell and posts, in your slicer

- Materials: brown or wood-look PLA for the timber, white PLA for snow, grey PLA for stone, bronze/metallic PLA for the bell, and gold for the stars

The two snow panels can be glued onto their sloping roof faces. Glue is also recommended for the stars, bell, front gable, small decorations, and the stone/wood assembly where needed. The post pegs are nominally 2.00 mm in diameter and the sockets 2.34 mm at 100% scale, giving 0.17 mm radial clearance before scaling. Check the peg-and-socket fit and adjust your slicer compensation if needed.

## Gallery and printing notes

Review the layer preview and supports before printing. Very fine details may benefit from a larger scale. The cover image is a concept visualization; the second image shows the actual model geometry.

## Design process and usage

Created by Flavora Studio using AI-assisted 3D modelling, followed by mesh cleanup, geometry repair, segmentation, and assembly modifications. Part of our original České Vánoce (Czech Christmas) series.

Suggested listing licence: Creative Commons Attribution–NonCommercial 4.0 (CC BY-NC 4.0), subject to selection in the Printables licence menu and applicable rights. Non-commercial printing and sharing under that licence are welcome. For permission to sell physical prints, please contact Flavora Studio separately.

If you make a print, we'd love to see a photo and hear whether the peg fits work on your printer. 🔔

:::::::::::::::::::

# Staročeská vánoční zvonička – 16dílný model | Flavora Studio

Kolekce České Vánoce / Czech Christmas Collection

## Příběh

Zasněžená vesnická zvonička z dob starých českých Vánoc. Pod zdobenou dřevěnou střechou visí zvon a řezbářské ornamenty připomínají lidovou tvorbu našich předků. Model je inspirován staročeskou estetikou, nepředstavuje však věrnou kopii konkrétní historické stavby.

Hodí se jako součást vánoční vesničky, zimního dioramatu nebo jako samostatná sváteční dekorace.

## Co balíček obsahuje

- 16 skutečně samostatných částí – dřevo, kámen, zvon, hvězdy, sloupky, štít a drobné ornamenty.

- Obě sněhové plochy střechy jsou samostatné, a lze je tisknout bílým filamentem.

- 3MF – sestava: zachovává vzájemnou pozici všech částí.

- 3MF – na podložce: rozložení pro přípravu tisku při 100% měřítku; neobsahuje hotový profil sliceru.

- ZIP jednotlivých STL: všech 16 dílů samostatně.

- Čtyři sloupky mají vodicí kolíky, které zapadají do otvorů v dřevěném podstavci.

Rozměry v měřítku 100 %: přibližně 54 × 59 × 100 mm. Pro FDM s tryskou 0,4 mm doporučujeme vyzkoušet 180–200 %, aby vynikly ornamenty. Zvětšete všechny díly stejně a podle potřeby je rozdělte na více tiskových podložek.

## Orientační nastavení tisku

- Tryska 0,4 mm; vrstva 0,12–0,16 mm; 3 perimetry; výplň 12–18 %.

- Podpěry podle náhledu vrstev, zejména pod střechou, zvonem a složitějšími převisy sloupků.

- Dřevo hnědá/Wood PLA; sníh bílá PLA; kameny šedá; zvon bronzová; hvězdy zlatá.

- Sníh a dekorace doporučujeme přilepit. U sloupků nejprve ověřit vůli kolíkových spojů.

- Průměr kolíku 2,00 mm, otvor 2,34 mm při 100 %; nominální radiální vůle 0,17 mm. Změnou měřítka se mění také vůle.

## Tipy k tisku a galerie

Před tiskem zkontrolujte podpěry a náhled vrstev ve sliceru. Jemné ornamenty lépe vyniknou ve větším měřítku. Titulní obrázek je vizualizace konceptu; druhý obrázek představuje skutečnou geometrii modelu.

Model Flavora Studio vznikl s pomocí AI nástrojů a následným vyčištěním, opravou a segmentací geometrie a úpravou montážních spojů.

Navrhovaná licence: CC BY-NC 4.0 (vybrat při nahrávání do Printables). Nekomerční využití dle zvolené licence je povoleno; pro povolení prodávat fyzické výtisky nás kontaktujte prostřednictvím profilu Flavora Studio.

Budeme rádi za fotografii vašeho výtisku a zkušenosti s montáží. 🔔

Tags