1 / 2
Rolling BB Visualizer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.28 – €0.34 net (excluding VAT)
For file: Background_0.15mm_PETG_MK3S_25m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.31 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 24.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A extruder motor visualizer with 6mm BB.
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 28
- Makes
- 1
- Views
- 299
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This extruder motor visualizer BB rolling.
Required other than printed parts:
- 3-6x 6mm airsoft BB (Not required when printing BB on your self)
- 2x 8x3mm Magnet
Print Settings:
- Material: PETG
- Layer height: 0.15mm
- Supports: No
- Perimeters: 2
Assembly:
- Assemble as shown in the image, and insert the magnets into or glue the hole. I recommend gluing each part.
- Place the second magnet on magnet, attach the Visualizer to the motor, and done.
