1 / 4
Santa Stuck in the Chimney | Christmas Decor — image 1
1 / 4

Santa Stuck in the Chimney | Christmas Decor

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Santa stuck head-first in a brick chimney, only his legs sticking out. 65 mm tall.

Rating
0 / 5
Likes
0
Downloads
2
Makes
0
Views
7
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Oops! Santa went down the chimney head-first and got stuck, with only his legs and boots sticking out. A funny Christmas decoration for the mantel or desk.

Print notes:

  • Tested on Bambu Lab P2S, 0.4 mm nozzle, PLA

  • 0.12 mm layers, 3 walls, 10% lightning infill

  • Organic tree supports (30 deg) where needed, already set in the 3MF

  • Size: about 37.8 x 33.2 x 65 mm

  • The photos show my single-colour white print

How it was made: the base shape was generated with AI, then cleaned up and prepared by hand for printing (mesh repair, flat base, supports and print settings). The cover image is a render of the 3MF in its filament colours; all other photos are real prints from my P2S.

Commercial use: this model is for personal use only (CC BY-NC). If you'd like to sell prints, please send me a message to discuss a commercial license.

☕ Enjoying this model? You can support my work with a coffee: https://buymeacoffee.com/mumakes

Tags