Ohm'un Çekici - Screwless 18650 USB-C Electric Screwdriver (N20)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Screwless remix of GW Finesse: 18650 battery, USB-C charging, rocker switch, spindle lock with motor interlock.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 60
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
Ohm'un Çekici is a screwless, rechargeable DIY electric screwdriver, remixed from GW Finesse by Goblinhan Yıkan.
Parts: N20 gearmotor (6 V, 100 RPM), 18650 cell, mini USB-C TP4056 (17 x 14 mm), 3 micro switches (IC-162A), contacts from a single 18650 holder, 100 nF capacitor, thin wire. No screws needed.
Print: PLA, 0.2 mm layers, 3 walls, no supports. Use ohm_cekici_tabla.3mf (per-part infill already set): shaft, rocker, slider and pins 100%, the rest 15%. Print the pins lying on their side; PETG is better for pins, rocker and slider.
Assembly: see the 3-page guide (montaj_kilavuzu.pdf). To open the body, squeeze the two barbs of each pin through the side window with tweezers and pull the pin down.
Source and parametric CadQuery model: https://github.com/ApoBen/ohmun-cekici
