1 / 2
Classic Tangram Puzzle with Storage Box - 7 Pieces — image 1
1 / 2

Classic Tangram Puzzle with Storage Box - 7 Pieces

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A classic seven-piece tangram with a storage tray and removable lid. Includes a full-plate STL and individual parts.

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
5
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Seven simple shapes, countless possibilities! This classic tangram includes two large triangles, one medium triangle, two small triangles, a square and a parallelogram. Arrange them into animals, people and geometric figures, or bring them back together into the original square.

The set includes a matching storage tray and a removable lid to keep the pieces together between puzzles. Side cutouts in the tray help you lift out the pieces. Print everything in one colour, or use the individual files to give each piece its own colour.

**Files included:**

- tangram-full-plate.stl: all seven pieces, the tray and the lid arranged together for printing. Nine separate parts with no connecting base.
- Seven individual puzzle-piece STL files.
- tangram-tray.stl and tangram-lid.stl for separate printing.

There are 10 STL files in total. Choose either the complete plate or the individual files; you do not need to print both.

**Dimensions at original scale:**

- Nominal assembled square: 100 x 100 mm, with 0.30 mm clearance along the cuts.
- Puzzle-piece thickness: 6 mm.
- Tray: 106 x 106 x 8.6 mm; internal space: 101.2 x 101.2 mm.
- Lid: 110.6 x 110.6 x 6 mm.
- Lid clearance: 0.30 mm per side, with a 4 mm overlap.

The lid is a removable slip-on cover, without a latch. It is not intended to secure the contents when the box is turned upside down. Fit depends on your printer; check the lid fit on your first print.

**Printing:**

All files are oriented for printing, with the flat underside on the build plate. The tray and lid print open side up. The geometry is designed to print without supports in these orientations.

The complete layout occupies approximately 218.3 x 194.2 mm and was arranged for a 220 x 220 mm K1C bed. It leaves very little spare width: preserve the relative positions, centre the complete set and check your slicer's printable area and purge-line position. Use no brim for this layout. If it does not fit your printer's usable area, use the individual files and arrange them across separate plates.

For the full plate, print all objects by layer rather than sequentially one at a time. STL files do not store the preview colours; the full plate is a single-colour layout unless you assign colours in your slicer.