Standee bases for cardboard figures – board 1.5 / 2.0 / 2.5 mm, Ø 25 and 32 mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Standee bases for cardboard figures: board 1.5, 2.0 or 2.5 mm, round 25 and 32 mm.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 12
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial
Round bases with a clamping slot for cardboard standees: three board thicknesses, two diameters. The slot narrows towards the bottom and holds the board without glue.
Please note: nothing has been printed yet. The clamping slot (0.15 mm wider than the board at the top, 0.15 mm narrower at the bottom) is calculated, not yet printed.
When the bases that came with the game are missing, wobble or wear out: these bases clamp the board in a slot that narrows towards the bottom. Measure your board and pick the matching thickness.
Three board thicknesses: 1.5, 2.0 and 2.5 mm. Slot 0.15 mm wider than the board at the top and 0.15 mm narrower at the bottom, 4.5 mm deep.
Ø 25 or 32 mm, 6 mm high, chamfered edges.
Dimensions: No foreign dimension; our part has not been printed yet. If it clamps too hard, use the next thicker variant; if it is too loose, the next thinner one.
Material: PLA is enough, PETG works too. Do not leave it in the sun or a hot car: PLA softens from about 55 °C.
Not a toy. Storage for game components and small parts; keep out of reach of small children.
Print settings
Material: PLA (or PETG). Do not leave it in the sun or a hot car: PLA softens from about 55 °C.
Layer height 0.2 mm, 2 walls, 15 % infill, no supports.
Orientation: On its underside, slot on top.
Print time approx. 6 min and about 2 g (default variant Ø 25 mm, board 2.0 mm: complete part; other variants differ).
Safety
Not a toy. Storage for game components and small parts; keep out of reach of small children. Do not store in the sun or a hot car.
FAQ
Which material? PLA is enough, PETG works too. Do not leave it in the sun or a hot car: PLA softens from about 55 °C.
Are there magnets? No. Lids hold by friction, a groove or a snap nose; magnets are deliberately left out.
How it's made
Parametric CAD (build123d, Python), exact solids. The CAD code was written with an AI assistant and checked by us; no AI-generated meshes or images. Renders are made from the CAD in Blender and show placeholder contents without artwork; they are not photos.
License
CC BY-NC 4.0: you may share and adapt it for non-commercial purposes, as long as you credit Magmacode and link the license (https://creativecommons.org/licenses/by-nc/4.0/). Commercial sale of printed parts only by written agreement with Magmacode.
Matching card boxes, deck boxes, card trays and organizers are in the Magmacode profile.
