Converter round → square 25 → 30, 32 → 40, 40 → 50 mm – single adapters
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Single adapters from round to square bases: 25 to 30, 32 to 40 and 40 to 50 mm.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 7
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Miniature Gaming Accessories
- License
- Creative Commons — Attribution — Noncommercial
Single adapters from round bases to square bases: pocket Ø nominal + 0.4 mm, outside target − 0.2 mm, 3.0 mm high. Only the pairs where the wall is thick enough.
Fits: common 28–32 mm tabletop systems, made by base size (nominal sizes of common plastic bases). Not an accessory of any game or base manufacturer and not affiliated with one; no game or manufacturer names, no logos on the parts.
Please note: nothing of this design has been printed yet, and it has not been tested with real bases. The nominal base sizes are documented (retailer tables of common plastic bases), the real foot sizes come from only one public measuring template, and the clearance, heights and some further dimensions are estimates (details under “Dimensions”). Print the free fit test set (in our “Magmacode” profile) first.
Want miniatures on round bases to join a formation of square bases? The round base goes into the round pocket, and the adapter has the outside size of the square base.
Only pairs that work: wall at the narrowest point 25 → 30: 2.2 mm, 32 → 40: 3.7 mm, 40 → 50: 4.7 mm. Minimum wall 1.2 mm.
Fits our trays: outside 0.2 mm under the target size, the tray recess is nominal + 0.4.
3.0 mm high, floor 1.2 mm, printed flat without supports. No magnets: the pockets guide the bases sideways, they sit loose in them.
In the set: All three single adapters (25 → 30, 32 → 40, 40 → 50 mm), each as its own file. Print as many as you need. The stated print time, filament amount, dimensions and weight refer to one 25 → 30 mm adapter only, not to the whole set.
Dimensions: Basis: nominal sizes of common plastic bases (retailer tables), foot sizes from a public measuring template. Pocket Ø nominal + 0.4 mm (0.2 per side) with lead-in, outside target − 0.2 mm. Real bases differ from the nominal size by up to about 1 mm depending on the maker (mostly smaller, ovals partly wider). If your bases only fit a larger clearance stage of the test set, scale the file in X and Y only in the slicer: factor = (nominal size + wanted clearance) ÷ (nominal size + 0.4). The 0.4 mm clearance is our assumption in the middle of the 0.3 to 1.0 mm range that trays on the market use; there are no measured foot sizes for 30 mm square bases, the outside follows the nominal size (estimate). Our part has not been printed or tested yet. Print the free fit test set (in our “Magmacode” profile) first: it shows with your own bases and printer which clearance fits.
Material: PLA, 0.4 mm nozzle, ideally 0.12 mm layers, no supports; PETG works too. PLA deforms in a hot car, so do not leave the parts there.
Made by base size, not for a particular game; no miniatures included.
Not a toy. Accessory for tabletop hobbyists aged 14 and up; contains small parts that can be swallowed, not for children under 3 years. No miniatures included. No connection to game or base manufacturers. Nothing load-bearing.
Variants (all included)
Round 25 → square 30 mm
Round 32 → square 40 mm
Round 40 → square 50 mm
Print settings
Material: PLA (or PETG). Do not leave it in the sun or a hot car: PLA softens from about 55 °C.
Layer height 0.12 mm, 2 walls, 15 % infill, no supports.
Orientation: Flat, as the files are laid out, no supports.
Print time approx. 8 min and about 2 g (default variant Round 25 → square 30 mm: one adapter; other variants and sizes differ).
Safety
Not a toy. Accessory for tabletop hobbyists aged 14 and up; contains small parts that can be swallowed, not for children under 3 years. No miniatures included. No connection to game or base manufacturers. Nothing load-bearing.
FAQ
Why is there no 28.5 → 30 mm? The wall would be only about 0.5 mm at the narrowest point, which is too thin for FDM printing.
What about round 25 to square 25 mm? There is no room for a wall. For that, the set “Skirmish trays for 25 mm round bases” includes trays on the 25 mm grid, base to base.
Have you printed and tested the part? Not yet. Our part has not been printed or tested yet. That is why you should print the free fit test set first and then a single part.
Do the bases stay in without magnets? The pockets guide the bases sideways, so they move along when you slide the part across the table. They sit loose: if you lift the part at an angle they can fall out. Magnets are not intended.
My bases sit too tight or too loose. What now? Real bases differ from the nominal size by up to about 1 mm depending on the maker (mostly smaller, ovals partly wider). If your bases only fit a larger clearance stage of the test set, scale the file in X and Y only in the slicer: factor = (nominal size + wanted clearance) ÷ (nominal size + 0.4).
Is this for a particular game? No. We build by base size and name no games or makers. Which base size and which formation you need is in your rules.
How it's made
Parametric CAD (build123d, Python), exact solids. The CAD code was written with an AI assistant and checked by us; no AI-generated meshes or images. Renders are made from the CAD in Blender and show the part in simple staged scenes (wooden table) with placeholder bases (our own plain bases), no miniatures; they are not photos.
License
CC BY-NC 4.0: you may share and adapt it for non-commercial purposes, as long as you credit Magmacode and link the license (https://creativecommons.org/licenses/by-nc/4.0/). Commercial sale of printed parts only by written agreement with Magmacode.
Matching movement trays, skirmish trays, base converters and plain, textured and flight bases are in the Magmacode profile.
