EUR pallets – EUR 1 single and as a stack of five, EUR 2/3 and EUR 6, N, TT, H0
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
EUR pallets for N, TT and H0: EUR 1 single or as a stack of five, plus EUR 2, EUR 3 and EUR 6.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 23
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props & Terrains
- License
- Creative Commons — Attribution — Noncommercial
Euro pallets as loads for loading roads, goods sheds and flat wagons: single, stacked and in three sizes. Footprints from the standard.
Please note: nothing of this design has been printed yet, and it has not been tested on a layout. The dimensions come from the standards and sources named under “Dimensions”; derived values are marked as such. Print the free check gauge (in our “Magmacode” profile) first.
Pallets lie wherever goods are transshipped. The set contains the EUR 1 pallet single and as a stack of five, plus the footprints of EUR 2/3 and EUR 6.
EUR 1 at 1200 × 800 × 144 mm, scaled down.
Stack of five as one part: quick to print, stable on the wagon.
EUR 2/3 and EUR 6 with documented footprints; EUR 2 and EUR 3 share the same rectangle and are the same part here.
In the set per scale:
EUR 1: prototype 1200 × 800 × 144 mm; N 7.5 × 5 × 0.9 mm, TT 10 × 6.67 × 1.2 mm, H0 13.79 × 9.2 × 1.66 mm
EUR 2 / EUR 3: prototype 1200 × 1000 × 144 mm; N 7.5 × 6.25 × 0.9 mm, TT 10 × 8.33 × 1.2 mm, H0 13.79 × 11.49 × 1.66 mm
EUR 6: prototype 800 × 600 × 144 mm; N 5 × 3.75 × 0.9 mm, TT 6.67 × 5 × 1.2 mm, H0 9.2 × 6.9 × 1.66 mm
Plus a stack of five EUR 1 pallets as one part.
Scales: One variant per scale: N (1:160), TT (1:120) and H0 (1:87). There is no Z: the pallet would be a flat 0.65 mm block there. Each variant contains the single parts and a collection plate with all parts of the scale (3 mm apart).
Dimensions: Prototype dimensions from GS1 Germany (EUR 1 to DIN EN 13698-1) and Wikipedia "EUR-pallet" (footprints EUR 2, 3, 6), divided by the scale. Simplified build: deck and bottom boards are thickened to 0.65 mm (the boards would be only 0.25 mm thick in H0), the overall height stays to scale; in TT and N without bottom boards. The height of EUR 2, 3 and 6 (same as EUR 1) and the position of the blocks are an estimate, not true to the prototype. How accurate it turns out depends on your printer, and our part has not been tested on a layout yet. Print the free check gauge (in our “Magmacode” profile) first to see in advance whether clearance and distances suit your setup.
Material: Resin recommended, the parts are small to scale; the stated print time and resin amount are an estimate for resin at 0.05 mm layers on a common MSLA printer. In H0 and TT, FDM in PLA with a 0.2 mm nozzle and 0.08 mm layers also works. With resin: wear gloves, follow the resin manufacturer's instructions and cure the parts fully.
Not a toy. Model-making accessory for model railway hobbyists aged 14 and up; contains small parts that can be swallowed, keep out of reach of small children.
Variants (all included)
N (1:160)
TT (1:120)
H0 (1:87)
Print settings
Material: Resin (alternative: PLA on an FDM printer, see below). Wear gloves, follow the resin manufacturer's instructions and cure the parts fully.
Resin, 0.05 mm layers: tilt the single parts by about 30–45° in the resin slicer and add light supports, on undersides and backs rather than visible faces.
After printing, wash the parts (cleaner as specified by the resin manufacturer), remove the supports and post-cure them fully under UV light.
FDM (H0, TT): PLA, 0.2 mm nozzle, 0.08 mm layers, no supports, as the files are laid out.
Print time approx. 45 min and about 1.2 ml of resin (default variant H0: collection plate with all parts; other variants differ); estimate for resin at 0.05 mm layers on a common MSLA printer.
Safety
Not a toy. Model-making accessory for model railway hobbyists aged 14 and up; contains small parts that can be swallowed, keep out of reach of small children.
FAQ
Resin or FDM? Resin recommended, the parts are small to scale; the stated print time and resin amount are an estimate for resin at 0.05 mm layers on a common MSLA printer. In H0 and TT, FDM in PLA with a 0.2 mm nozzle and 0.08 mm layers also works. With resin: wear gloves, follow the resin manufacturer's instructions and cure the parts fully.
Does the part carry current or work? No. Nothing in this range carries current; detail parts are dummies.
How it's made
Parametric CAD (build123d, Python), exact solids. The CAD code was written with an AI assistant and checked by us; no AI-generated meshes or images. Renders are made from the CAD in Blender and show the part in simple staged scenes (placeholder track without brand, cutting mat); they are not photos.
License
CC BY-NC 4.0: you may share and adapt it for non-commercial purposes, as long as you credit Magmacode and link the license (https://creativecommons.org/licenses/by-nc/4.0/). Commercial sale of printed parts only by written agreement with Magmacode.
Matching gauges, loads, tunnel portals and scenery parts for model railways are in the Magmacode profile.
