Polaroid Dark Slide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dark slide for polaroid 600, SX-70 and I-Type films
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 41
- Makes
- 0
- Views
- 692
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Dark slide for Polaroid Camera film cartridges
Fits 600, SX-70 and I-Type films
useful if you want to remove a partially used pack of film from your camera and you don't have your original darkslide for whatever reason
this darkslide is able to be purged by camera after insertion of pack
Print at 100% infill in solid black filament like a black PLA (No abrasive filaments). This is required to block all possible light from getting through as that will spoil the top film
To insert Dark slide (For SX-70 and 600 cameras)
1 - Open Film Door
2 - Dark slide in hand, carefully fold down the protective black film at front of cartridge
3 - Insert darkslide over top of the top visible film, with the tab of darkslide at left going into cartridge first
4 - Gently slide in as far as possible
5 - Slowly remove pack from camera checking darkslide is at top
6- If darkslide isn't inserted fully, gently push it down in the center of the slide at rear of film pack to drop it under the lip
7- if you can shut the little door at front of cartridge, you're done