Cornice/Cove Mitre Guides
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cornice/Cove Mitre guides for cutting cornice/cove joints using a hand saw.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 9
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
My re-design of Patrick Cruse's 55mm Cornice Mitre Guides including adding a flange to each guide to help with sawing and a cutout to reduce the amount of plastic required per print.
I find these Mitre Guides much easier to use than a Mitre Box especially if you are new to cutting and installing Cornice/Cove because you can place them on the ceiling/wall corner to visualize what type of cuts need to be made.
They can also be used to cut diagonal joins for longer runs.
Features
Flange on each guide to help with sawing.
Models for marking where the Cornice/Cove needs to be fixed in place on the ceiling/wall corner.
Non-printed materials required
N/A
Print settings
Property | Value | Notes |
Filament type | PLA, PETG, ABS | I printed mine with PLA. |
Filament color | Any | I printed mine in Orange. |
Layer height | 0.28 to 0.3mm | As these are functional prints, thinner layer heights are unnecessary. |
Infill | 5 to 15% | |
Perimeters | 2 to 4 | |
Support material | No | |
Model orientation | Flange/edge on the print bed. |
|
Clean up | N/A |
|
Assembly
N/A