Kinesis Freestyle Edge Split Keyboard Tenting Riser + Android Qi Charger + Valet Tray + XP-Pen Stylus Dock
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
12° tenting riser for Kinesis Freestyle Edge RGB + Ø107mm Belkin/Qi bay, 30mm deep 3-bay/120x40 valet & XP-Pen dock.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 5
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A 1-piece, **100% support-free** PETG/PLA-printable **12° ergonomic tenting riser and extended desk organizer console** (262.99 × 246.00 × 41.00 mm, sized for the 270 × 270 × 270 mm **Snapmaker U1** build plate with 3.50 mm per-side clearance and **zero supports required**) designed for the **Kinesis Gaming Freestyle Edge RGB Split Mechanical Keyboard** (with factory cushioned palm supports attached).
---
### Attribution & MakerWorld Remix Credits
Special thanks to the original creators on MakerWorld whose designs inspired and informed this model:
1. **Kinesis Freestyle Edge 12° Tenting Rails & Top/Back Locking Tabs**: Remixed from [**Magic Trackpad mount + tenting kit for Kinesis Freestyle Edge RGB** by **levpopov** (MakerWorld #112477)](https://makerworld.com/en/models/112477-magic-trackpad-mount-tenting-kit-for-kinesis-frees#profileId-120443).
2. **XP-Pen Vertical Stylus Stand & X-Saddle**: Adapted from [**Stylus Dock for XP-Pen** by **NEWSTREAM** (MakerWorld #949427)](https://makerworld.com/en/models/949427-stylus-dock-for-xp-pen#profileId-917041).
---
### Key Features
- **100% Support-Free Geometry (Supports: None)**:
- Every single downward-facing surface across the entire dock and both Qi adapter rings is engineered at ≤ 45° from vertical (0.00 mm² of overhangs steeper than 45°):
- **Front/Bottom Inner Rail Support Blocks (X = +56.85 .. +92.85 mm)**: Self-supporting **34.1°** outer bevel (< 45°).
- **Back/Top Wide Cradle & Dual Locking Prongs (X = -94.35 .. -69.35 mm)**: Self-supporting **40.15°** outer bevel (< 45°).
- **Full-Contact Solid Flat Base (Z = 0.00 mm)**: No underside cable tunnels—maximizing first-layer bed adhesion and eliminating warping across the 263 × 246 mm footprint.
- **Palm-Rest-Compatible Kinesis Freestyle Edge 12° Tenting Geometry (+7 mm Wider Split, 3.5 mm Per-Side Bed Clearance)**:
- **Back/Top (X = -94.05 .. -89.35 mm)**: Wide 25 mm upper cradle with **dual locking prong tabs** matching the MakerWorld #112477 datum to 0.00 mm to engage the top/back underside slots of the left and right Freestyle Edge keyboard halves.
- **Front/Bottom (X = +56.85 .. +92.85 mm)**: 36.0 mm inner support blocks recessed 1.50 mm before the attached palm-rest drop-down flange (X = +94.28 mm) so the factory cushioned palm supports remain attached with zero interference.
- **Extended Full-Height Central Console (157.00 × 246.00 × 32.00 mm)**:
- Extends -30.00 mm at the back/top (within the 35 mm keyboard overhang) and +27.30 mm forward between the left and right cushioned palm supports (X = -124.35 .. +121.65 mm), finished with a continuous level Z = 32.00 mm top deck, 45° architectural perimeter chamfers, and R = 10 mm rounded corners.
- **Rear Universal Belkin / Android Qi Wireless Charger Bay (Ø107 × 9.0 mm) + Direct Open-Top Back Cutout**:
- Positioned at the rear (X = -65.00 mm, Y = -17.50 mm) for clean, direct rear cable management.
- Native **Ø107.0 × 9.0 mm** recessed circular pocket directly fits **100–106 mm Qi wireless charging pads** (including **4.0 in / 102–106 mm Belkin BoostCharge 15W** pucks, **Anker PowerWave Pad**, **Spigen**, **Yootech**, and **INIU**) while letting 10–12 mm pads sit 1–3 mm proud of the Z = 32.00 mm deck for reliable phone contact.
- Includes **drop-in Ø90 mm (OD 106.4 -> ID 91.2 mm) and Ø60 mm (OD 90.6 -> ID 61.5 mm) reducer rings** (kinesis_qi_adapters_plate.3mf).
- **Direct Open-Top Rear Wall USB-C Cutout (28.0 mm Wide)**: Cuts straight through the 5.85 mm back wall (Z = 20.5 .. 32.0 mm) with a top-loading 14.0 mm floor cord groove from the Ø32 mm center push-out hole—no blind threading and no underside tunnel required.
- **Deep 30.00 mm (3.0 cm) 3-Well Front Storage Console (with Dedicated 120 × 40 mm Vertical Well)**:
- With the charger at the rear and a 32.00 mm console deck over a 2.00 mm floor, all three front compartments are a full **30.00 mm deep**:
- **Bay 2C (Dedicated 120 × 40 mm Vertically-Oriented Deep Well, Front-Right)**: **122.0 × 42.0 × 30.0 mm** wall-to-wall (**exact 120.0 × 40.0 mm flat floor** inside the 1.0 mm bottom bevel, X = -6.50 .. +115.50 mm, Y = -2.50 .. +39.50 mm).
- **Bay 2A (Front-Left Deep Small-Item Valet Well)**: **58.75 × 65.00 × 30.00 mm** (X = +56.75 .. +115.50 mm, Y = -72.00 .. -7.00 mm).
- **Bay 2B (Mid-Left Deep Small-Item Valet Well)**: **58.75 × 65.00 × 30.00 mm** (X = -6.50 .. +52.25 mm, Y = -72.00 .. -7.00 mm).
- **Integrated XP-Pen Vertical Stylus Stand & Full-Length 179 mm Horizontal Trough (Y = +59.00 mm)**:
- **Rear Vertical Stylus Stand** at (X = -102.0 mm, Y = +59.0 mm, Z_top = 41.0 mm) with the multi-stage **Ø16.1 mm -> Ø8.54 mm -> Ø3.80 mm** conical stylus well + Ø2.5 mm nib-relief bore and orthogonal X-saddle quick-rest notch.
- **Full-Length 179.0 mm Horizontal Stylus Trough (X = -66.0 .. +113.0 mm)** with hemispherical ball-end terminations and a centered 36 × 28 mm chamfered finger-pinch scoop.
---
### Included Files
1. kinesis_freestyle_edge_riser.3mf / .stl / .step — 1-piece **100% support-free** main keyboard tenting riser & 3-bay + 120×40 center organizer console (262.99 × 246.00 × 41.00 mm).
2. kinesis_qi_adapters_plate.3mf / .stl — Build plate with both drop-in Qi charger reducer rings (Ø90 mm and Ø60 mm pucks, sized for the Ø107.0 × 9.0 mm bay).
3. kinesis_qi_adapter_90mm.step & kinesis_qi_adapter_60mm.step — Individual CAD STEP models for custom sizing.
---
### Recommended Print Settings
- **Material**: PETG (recommended) or PLA / PLA+
- **Build Volume**: 270 × 270 mm (Snapmaker U1 with 3.50 mm per-side clearance)
- **Layer Height**: 0.20 mm (0.4 mm nozzle)
- **Wall Loops / Perimeters**: 4 (1.6 mm wall thickness)
- **Top / Bottom Shells**: 5 layers (1.0 mm)
- **Infill**: 20%–25% Gyroid or Cubic
- **Supports**: **None (100% Support-Free)** — prints flat on the bed with zero supports!
