NRK Labyrint Livspuck
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The lifepuck from the norwegian TV-show "Labyrint". Printed in two parts, with the glass beeing printed in some…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 19
- Makes
- 0
- Views
- 430
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution
The lifepuck from the norwegian TV-show "Labyrint".
Printed in two parts, with the glass beeing printed in some transparent material.
The glass just pops in place, and stays there. No need for glue.
Assembly requires the following:
1 x CR2032 or 2025
1 x CR2032 or 2025 holder (for easy swapping battery)
OR
Some electrical tape around the battery and the cables
1 x Green LED (or colour of you wish)
Some wires
An RC on/off-switch or similar (see link)
Drill two small holes in the middle of the "crater"
Insert LED in holes
Solder wires for switch and holder
Put together
Link for battery holder https://www.aliexpress.com/item/10PCS-Battery-Button-Cell-Holder-Socket-Case-CR2032-battery-holder-2032/32819924096.html?spm=a2g0s.9042311.0.0.27424c4dTToe1n
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Steel
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Filament: Any PLA works just fine Transparent and copper (or paint)
Category: Toys & Games