1 / 2
Tapper Drawstring Beads
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tapper Drawstring Beads
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 6
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The drawstring hole is 5.8mm.
Pixel height/length is 1.2mm.
There's 3 multicolor layers, a single color middle section, then 3 more multicolor layers + a few more top layers on some colors for texturing. Hopefully that cuts down on the AMS waste.
These .3mf files are configured for a Bambu P2S with a 5 color AMS. However the general settings are listed below:
0.4mm nozzle
0.2mm layer height
0.4mm line width
50% infill
Concentric pattern for top and bottom layers
Ironing enabled for all top layers