1 / 3
Onyx Boox 10.3 E-Ink Tablet - Sleeve and Carrying Case with Stand — image 1
1 / 3

Onyx Boox 10.3 E-Ink Tablet - Sleeve and Carrying Case with Stand

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A sleeve with stylus-holder and a carrying case with a two-angle stand for the Onyx Boox 10.3 E-Ink Tablet

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
6
Reviews
0

Updated at source:

Model information

License
Open Community License v1.1

Onyx Boox 10.3 E-Ink Tablet  Sleeve and Carrying Case with Stand

My aim when designing this was at maximum protection for the Tablet.

The sleeve fits the tablet tightly, it is NOT meant to take the device in and out. To get it out you would have to push carefully through the bottom holes with something suitable.

The Stylus has to be slided into the holder from above, its usb-connector facing towards the tablet so that the eraser button on the stylus can go through the gap in the holder.

The Carrying Case works like a shoulder bag and offers a simple stand with two different angles. In addition, there is a storage space for a small USB-C-stick in the bottom corner. Getting the stick in and out of there can be a bit difficult, I recommend attaching a little strap to the stick for easier handling. Anyway, if your device runs out of storage you might consider it worth the effort.

So far I printed everything only in PLA. I guess the sleeve should work fine in TPU as well. If anyone tries this, please let me know what your experiences are.

I hope this design will serve you well and you will have as much fun with it as I do.

Tags