Phone Bin for Hyundai Ioniq 5
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Phone holder bin that clips into the center front cupholders of my 2023 Hyundai Ioniq 5.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 0
- Views
- 37
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Phone holder bin that clips into the center front cupholders of my 2023 Hyundai Ioniq 5.
11/13/26: I found some time and updated my design. I added a divider to the bin part so that my phone wouldn't fall over all the time. I also changed the bottom of the bin to just locate along the bottom and fixed into place. The external dimensions are the same.
The pictures on my desk are the new version. The picture showing the installation in my car is of the older version before I added the divider.
Vegar's design is great, but kept pulling loose from my printer bed. So I did the reasonable thing. I thickened the walls, narrowed and shortened the bin, removed the cable management hook, and reversed engineered the design into an editable Fusion model.
Printing and Assembly
I recommend printing it in PETG or ABS or better. PLA will not survive a hot car in the summer.
I assembled the main body and bottom using my soldering iron to melt/braze them together. Worked well enough for me. See the detail picture to see the groove technique I used.