1 / 44
Medieval Knight Warrior – NONAME Articulated Figure | No AMS — image 1
1 / 44

Medieval Knight Warrior – NONAME Articulated Figure | No AMS

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

17 cm articulated medieval knight with separate armor, sword and shield. Printable in parts without AMS.

Rating
0 / 5
Likes
1
Downloads
4
Makes
0
Views
27
Reviews
0

Updated at source:

Model information

License
Standard Digital File License

NONAME figure-armor-weapons ball-jointed action figure, fully printable in separate parts NO AMS

Everything has been tested

The armor and weapons are compatible with the NONAME figure.

All parts of the body have one side that is always flat—place the object on the build plate with that flat side down. Then add supports for overhangs up to 45 degrees.

The ball joints are printed separately. I recommend printing them in high detail with 50% infill to ensure strength

The best option for printing joints is to print the mortise from PET-G filament with 50% infill, and the tenon from TPU filament with 20% infill. Personally, I used Prusament TPU 95A, and this makes the joint virtually unbreakable and perfectly strong.

The joint has the same dimensions for all body parts, so simply copy one joint model and insert it seven times.

After printing, glue the joints into the pre-prepared slots, then assemble the body parts together.

The height of the assembled figure is 17 cm.

Redistribution of the 3D STL files is prohibited.

Please like before downloading the model. Thank you so much for your support ✌

saved in STL
NONAME figure
1.head
2.body
3.arm R-L 2 pose
4.leg R-L
5.foot R-L
6. hand R-L hand weapons
7. eye R-L

ARMOR
1.helm
2.chest front
3.chest back
4.shlouder R-L

WEAPONS
1.sword
2.shield
3.holder shield

ball joints saved in STL
1.mortise
2.tenon
3. tenon for TPU

3D PRINTING SETTINGS

NONAME figure – place all parts with the cut side on the print bed, infill 15%.

Weapons – place all parts with the cut side on the print bed 30% infill.

Armor - place all parts with the cut side on the print bed 30% infill

Print the mortise and tenon from PETG filament with 50% infill for better detail.

Print the TPU tenon at normal quality with 20% infill.

Follow my Instagram @artmancults for more models and updates.

Tags