Sparrows Practice Locks Display Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A desktop display stand for your Sparrows Practice Locks — Available in multiple configurations.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 0
- Makes
- 0
- Views
- 9
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A desktop display stand for your Sparrows Practice Locks. There are several configurations, including some with embedded magnets for use with metal desktops. Each display stand has recesses on the base for optional stick-on rubber feet.
Optional Rubber Feet
(4x) adhesive-back rubber feet per display stand.
Peel and stick a rubber foot in each one of the 10mm diameter recesses on the bottom of the display stand. I recommend pressing the display stand firmly onto a sturdy surface for 20-30 seconds after applying all four feet to ensure a good bond.
Optional Embedded Magnets
(2x) 60x10x3mm bar magnets per display stand.
Be sure you're using the correct model ("-Mag") which incorporates the magnet pockets into the base of the display stand. Set a print pause at the correct layer height—at the beginning of the layer which will "close" the top of the magnet pocket(s)—in the slicer. See example screenshot ----->
When the print pauses, place the magnets in the pocket(s) and resume the print.
If you don't see a configuration of this model that suits your specific needs, drop me a comment with your specific request and I'll see what I can do! If you choose to print this model, don't forget to post a make! I always enjoy seeing the results of community members' prints! Likes and reviews are also always appreciated!