XDEEP Corrugated Hose Clip for Miflex Inflator
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Figure-8 clip that holds the Miflex inflator hose against the XDEEP corrugated hose. PETG, print-tested.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 1
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Figure-8 clip that holds the Miflex inflator hose (Ø12) against the XDEEP corrugated hose (Ø28) and keeps it from flapping around.
Two 270° C-rings; a rib sits in the corrugation groove so the clip doesn't slide
- 9 mm wide, 2.52 mm walls, PETG
- Print-tested, holds securely
Files: 3MF (5 clips on one plate, single color, Bambu Studio project) and STEP.
Print settings: Bambu Lab P2S, 0.4 nozzle, 0.16 mm layers, PETG, 2 walls, 15% gyroid, 255 °C / 70 °C textured PEI. All walls are multiples of the 0.42 mm line width; the model is exact CAD with real fillets.
Also on MakerWorld: https://makerworld.com/en/models/3568750
