Scubapro Spectra Snorkel Clip for Backplate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Snap-in clips that hold a Scubapro Spectra snorkel flat along the backplate edge. No screws, PETG.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 2
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Snorkel holder for the Scubapro Spectra snorkel (oval tube 30 x 20 mm). Two clips hold the snorkel flat along the edge of the backplate, out of the way. Each clip snaps into a Ø12 mm hole of the backplate (made for the XDEEP Zeos plate, 3 mm thick).
Oval ring with a light grip (0.2 mm undersize), 80% opening for easy on/off
- Split snap pin with a barb: no screws, no tools
- Single color, PETG
Files: 3MF (2 pcs on one plate, Bambu Studio project) and STEP.
Print settings: Bambu Lab P2S, 0.4 nozzle, 0.16 mm layers, PETG, 2 walls, 15% gyroid, 255 °C / 70 °C textured PEI. All walls are multiples of the 0.42 mm line width; the model is exact CAD with real fillets.
Also on MakerWorld: https://makerworld.com/en/models/3568775