Bungee-Free Triglide with D-Ring (R / L1 / L2)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Harness triglide with an integrated D-ring to replace bungee loops on a dive rig. Set of three, PETG.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 5
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Triglide for harness webbing with an integrated D-ring, made to replace bungee loops on the rig: clip a bolt snap or a bungee end straight to the printed ring.
Two centered webbing slots, 7.98 mm bars on each side
- Loop bars rounded (R1.45) so they're kind to bolt snaps and line
- Three variants: R, L1 and L2; the set file prints all three on one plate
- No lettering on purpose: raised text gets torn off by the webbing
- Single color, PETG
Files: 3MF (set R + L1 + L2, Bambu Studio project) and STEP (flat blank of each variant).
Print settings: Bambu Lab P2S, 0.4 nozzle, 0.16 mm layers, PETG, 2 walls, 15% gyroid, 255 °C / 70 °C textured PEI. All walls are multiples of the 0.42 mm line width; the model is exact CAD with real fillets.
Also on MakerWorld: https://makerworld.com/en/models/3568790
