10" rack - 1U - Fortigate 60/61F

This 1U rack mount tray is specifically designed to securely hold the FortiGate 60F firewall in your 10" rack setup. The open ventilated design provides excellent airflow around the device while the precise dimensions ensure a perfect fit. The tray slides into standard 10" rack rails using M5x10mm screws.

Compatible FortiGate Models (verified from datasheets)

Note: Larger models like 70F/90F (44 x 216 x 160 mm) may fit with slight clearance but are not officially verified.

Key Features:

• Precise FortiGate 60F dimensions – Snug fit with no rattling

• Ventilated open design – Optimal airflow for 24/7 operation

• Standard 10" rack mounting

• Cable management space – Rear access for power/network cables

• Front accessibility – Easy maintenance without rack removal

• Version 2 has hexagonal ventilation holes on both sides.

Recommended Print Settings (PETG)

• Nozzle: 0.4mm

• Speed : 50-80 mm/s

• Layer height: 0.20mm 

• Walls: 4 (for rack ear strength) 

• Infill: 30% (gyroid pattern) 

• Supports: No, but it may be necessary for the 180° curve at the rear of the rack on the side vents.

• Bed temp: 80-85°C 

• Nozzle temp: 245-260°C

• Cooling: 50-70%

• Orientation : Front panel facing down, ears flat on bed

Why PETG is Required
FortiGate firewalls generate significant heat during operation. Standard PLA can warp above 50°C in enclosed rack environments. PETG provides superior heat resistance (up to 80°C) and mechanical strength for rack‑mounted networking gear.

Assembly

The firewall is easy to insert, but you must remember to remove the four rubber pads underneath it. Push the firewall all the way in until it stops.