1 / 4
USB Disks + microSD holder — image 1
1 / 4

USB Disks + microSD holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

🇬🇧 USB Holder for 7 Flash Drives + microSD Card SlotThis practical holder is designed to organize up to 7 USB flash…

Rating
0 / 5
Likes
4
Downloads
3
Makes
0
Views
21
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Share Alike

🇬🇧 USB Holder for 7 Flash Drives + microSD Card Slot

This practical holder is designed to organize up to 7 USB flash drives along with one dedicated slot for a microSD card, making it a versatile organizer for your data storage devices. With compact dimensions and a simple design, it fits perfectly on any desk, whether in the office or at home. The USB slots hold drives firmly yet allow for easy removal, and the microSD card has its own secure slot.

The model was created in Autodesk Fusion 360 and optimized for 3D printing without supports as a single piece. It was printed on an Ender 3 with linear rails using Leaf Green PLA filament from Aurapol. The result is a sturdy, elegant, and practical addition to any workspace.

Specifications:

Dimensions: 125 × 15 × 24 mm

Material: PLA (Aurapol, Leaf Green)

Nozzle temperature: 230 °C

Bed temperature: 45 °C

Layer height: 0.2 mm (recommended)

Supports: Not needed

Parts: 1 (single-piece print)

Tested on: Ender 3 with linear rails


🇨🇿 USB držák na 7 USB disků + slot na microSD kartu

Tento praktický držák je navržen pro uspořádání až 7 USB flash disků a jednoho slotu na microSD kartu, což z něj činí univerzální organizér pro vaše datové nosiče. Díky kompaktním rozměrům a jednoduchému designu se skvěle hodí na pracovní stůl v kanceláři i doma. Otvory jsou navrženy tak, aby USB disky držely pevně, ale zároveň umožňovaly snadné vyjmutí, a microSD karta má svůj vlastní bezpečný slot.

Model byl vytvořen v programu Autodesk Fusion 360 a optimalizován pro 3D tisk bez podpěr jako jeden celek. Tisk probíhal na tiskárně Ender 3 s lineárními osami za použití zeleného PLA filamentu (Leaf Green) od výrobce Aurapol. Výsledek je pevný, elegantní a praktický doplněk každého pracovního prostoru.

Specifikace:

Rozměry: 125 × 15 × 24 mm

Materiál: PLA (Aurapol, Leaf Green)

Teplota trysky: 230 °C

Teplota podložky: 45 °C

Výška vrstvy: 0.2 mm (doporučeno)

Podpěry: nejsou potřeba

Počet částí: 1 (tisk vcelku)

Testováno na: Ender 3 s lineárními osami

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

0,16 mm

Infill:

10%

Filament: Aurapol PLA Leaf Green

Category: Tool Holders & Boxes

Tags