1 / 3
Embroidery Hoop 150mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Embroidery hoop. Requires two pieces of M4 hardware.
- Rating
- 5 / 5
- Likes
- 34
- Downloads
- 149
- Makes
- 1
- Views
- 749
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Screw tension embroidery hoop. Requires two pieces of M4 hardware. The outer hoop has a recess for a square nut and a M4 screw.
Screw M4 x 0.7 mm Thread, 25 mm long
Square Nut, M4 x 0.7 mm Thread
Print Settings
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament: PolyMaker PLA
Notes:
Print with additional walls or shells for added strength.