Cantilever Portable Tiny Whoop Station

This is designed for the DJI goggle N3, Radio Master Pocket ERLS, Beta FPV Meteor 75 Pro II, 1s batteries, and any spare parts or wires you need to carry together :D Note: The top along with its handle are only to lock the trays and close the top of the box for transport in a backpack, it is not meant as a handle for the box to be carried from due to the sheer weight of the goggles and other equipment. In other words the purpose of this is to help you organize and keep your stuff together neatly so you can keep and find spare parts or what ever you need without having pieces in a messy tangled pile next to you or broken in your bag. Note: I recommend that you add a thin layer of foam on the bottom and top of the enclosure for the N3 as I have built in enough room for it to prevent tiny white marks (though they can be buffed out easily with your finger). I have designed the tolerances as such to print on a Bambu Lab X2D, I do not see why they would not work on other printers but it is a good practice to run a tolerance test on your printer first. Try .1mm if the part goes in and does not come out, even with force my model should be fine to print. Enjoy :D