1 / 3
Satsana Fan Mount Ender 3v2 with 5015 Fan Channel — image 1
1 / 3

Satsana Fan Mount Ender 3v2 with 5015 Fan Channel

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Update-- added fan guard. use 2 23-25mm m3 screws to secure. Make sure to either drill out or tap the holes in the fan…

Rating
5 / 5
Likes
25
Downloads
210
Makes
4
Views
1,964
Reviews
2

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution

Update-- added fan guard. use 2 23-25mm m3 screws to secure. Make sure to either drill out or tap the holes in the fan guard, and tap the holes in the fan duct for a proper fit.

Remixed version of https://www.thingiverse.com/thing:4647053 by scrath, which was in turn remixed from the original satsana fan duct. Cable clip for this can be found here, but I have not tested it yet.

The original version didnt properly fit a 5015 fan without using tape to seal it in, so I made a quick remix in tinkercad.

This can be secured with 2 25mm M3 bolts and nuts, and there should be enough length on the screws to add a cover to the top screw to cover the hotend fan.

Hotend fan is secured with the 2 original Ender screws.

I printed this with no supports with fairly good results. There was some bad layer adhesion in some corners of the fan channel that could be easily cleaned up with a hobby knife.

Some modification may be required to get hinges on your fan to hit. I took 30 seconds with a file to get an appropriate fit. Otherwise, your fan should slip right in.

Blower Fan used: https://www.amazon.com/gp/product/B07DB7DLMM/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1

Hotend fan: https://www.amazon.com/Noctua-Cooling-Blades-Bearing-NF-A4x10/dp/B009NQLT0M/ref=sr_1_2?dchild=1&keywords=noctua+4010&qid=1618080602&s=electronics&sr=1-2

Print Settings

Rafts:

No

Supports:

No

Resolution:

200

Infill:

20

Filament: Esun PLA+ White


Notes:

Some Cleanup required around the corners of the fan channel with a hobby knife, or use some custom supports around that area.

Category: 3D Printer Accessories

Tags