3D Cube Vise
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.09 – €0.11 net (excluding VAT)
For file: Cone Clamp Head_0.2mm_PLA_MK3S_7m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.10 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 6.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
8"x8"x8" Cube Vise with adjustable customizable clamping arms and heads to hold any item in 3D space.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 3
- Makes
- 0
- Views
- 78
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This 8" x 8" x 8" Cube Vise is designed to hold any and every item that will fit inside.
The main Cube is a press fit design for easy changes.
The clamping arms are fully customizable and adjustable to conform to any item. Print as many as you need, in any setup, with any clamping head, to get the best grip possible on your item.
The Bar Slide Bracket is used to slide along the square bars, and can be bolted down where you want.
Bracket pivot arms come in (3) different lengths, and can be bolted together, to get any length and angle you need.
90 degree pivot brackets allow for angular adjustment on another plate, and have a threaded hole for the 2.25" or 4" long threaded vice rod.
There are several different clamping ends for the rod that can be threaded on to ensure you get the exact clamp you want.
All parts are held together with the clamping nut and bolt, designed for to clamp tight together for a friction hold.
*Please note, I have not fully printed and tested this device yet*