Modular Air Pocket Lego Lord Garmadon
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A modular air pocket based angry guy with the head of lord garmadon.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 1
- Makes
- 0
- Views
- 10
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This pneumatic pop-up toy uses compressed air from a plunger chamber to trigger an internal pop-up mechanism without electronics. It features a fully modular layout with customizable heads and caps, as well as two complete style variations.
Body Systems:
Cubic System: Uses a square main body, a cubic neck, and matching cubic arms.
Cylindrical System: Uses a round main body, a cylindrical neck, and dedicated cylindrical arms.
Modular Head & Cap Mounts: Heads and headwear (such as helmets or caps) can be swapped independently between both body types.
Assembly Guide:
Sand any layer seams or rough edges on internal channels, the neck, and arms so sliding contacts move without binding.
Insert the air pocket's spring and the plunger and seal the lid into the base. Verify that the chamber holds air pressure when plunged.
Select either the cubic or cylindrical setup. Attach the corresponding arms and neck to your chosen main body type.
Push your chosen head onto the neck joint, then snap your selected cap or helmet onto the head.
Connect the upper body assembly to the pneumatic push rod in the base housing.
Recommended Print Settings
Parameter | Value | Notes |
|---|---|---|
Layer Height | 0.16 – 0.20 mm | 0.16 mm offers smoother movement on sliding joints |
Wall Count | 3 – 4 perimeters | Keeps the pressure chamber airtight |
Top/Bottom Layers | 4 | Prevents air pinholes on flat surfaces |
Infill | 15 – 20% | Gyroid or Cubic works best |
Seam Placement | Aligned / Rear | Keeps seam bumps off internal sliding surfaces |
Material | PLA / PLA+ / PETG | All works |